|
WASHING MACHINE TYPE “V15”
YEAR
OF MANUFACTURING 1996
ROLLER
WIDTH 200 cm
MAXIMUM
FABRIC WIDTH 180 cm
MINIMUM
FABRIC WIDTH 90 cm
VARIABLE
SPEED BETWEEN 4
AND 40 m/min
MACHINE
COMPOSED OF THE FOLLOWING ELEMENTS:
ET
Fabric
inlet frame
No
4 V15
Washing
unit with 18 m fabric capacity. Rollers 150 mm.
-
Upper rollers driven for soft fabric transportation.
-
The unit is equipped with acquajet water blades
-
Water recirculation pump rated 100 m3/h,
-
Screen filter,
-
Direct heating pipe.
Squeezing
mangle 1,5 T with two vertical rollers
diameter
154 mm, covered with synthetic rubber driven
by
D.C. motor,
No
1 V15
Washing
unit with 18 m fabric capacity. Rollers 150 mm.
-
Upper rollers driven for soft fabric transportation.
-
The unit is equipped with acquajet water blades
-
Water recirculation pump rated 100 m3/h,
-
Screen filter,
-
Direct heating pipe.
Squeezing
mangle 10 T with two vertical rollers
diameter
240mm, covered with synthetic rubber driven
by
D.C. motor.
UT
Fabric
outlet frame with pull out roller
For
operation of the machine following utilities are required :
.
Water at 2 / 3 Atm pressure
.
Saturated steam at 6 Atm
.
Electrical voltage 380v 50hz 3ph
.
Compressed air 10 Atm
Washing
tanks made in stainless steel Aisi 304
FABRIC
INTRODUCTION AND SELVEDGE OPENING
DEVICE
AT THE INLET
Including
centering device by photocell,
No
2TEMPERATURE CONTROL SYSTEM
Consisting
of one heat exchanger working with saturated
steam at
6 Atm, temperature feeler and pneumatic valve.
No
1 SELF-CLEANING FILTER
With
rotating disc.
Dancing
bar for synchronisation with the dryer
LOOP DRYING
POLYMERISING MACHINE TYPE AFL
Open
Layout
Capacity of
fabric up to 150
m
Rollers
width 200 cm
Effective
width for one strand of 180 cm
Speed 5 to
50 m/min
Heating
with thermic oil/saturated steam
at 8/10 bar
300.000 Kcal/h
Evaporation
water capacity 250 Kg/h
CONSISTING
OF :
·
Drying chamber made with pressed steel frame ,
insulated by rock
wool panels 55 mm thickness
·
Fans and ducts for air recirculation
·
Exhaust
fans
·
Draw in roller driven by D.C. motor
·
Loops
formation device
·
Poles carrying loops covered by special high-grip
compound
·
Access
doors on side walls
·
Inspection
windows
·
Entry
frame
·
Plaiter driven by D.C. motors
·
Heat
recovery system air/air installed on the exhaust ducts
PACKING
For delivery F.O.B. in containers:
Included
INSURANCE:
At customer's charge
PAYMENT
TERMS:
50%
Down Payment
50%
at advice of machine ready for shipment
SHIPMENT
DATE:
5
months from order completion (Excluded August)
ERECTION:
We
shall send one of our fitters for supervising
the
erection of the machine
Included
At
customer's charge :
-
travelling expenses (airplane return ticket)
-
living expenses
OUR
FITTER SHOULD BE ASSISTED BY:
-
1 foreman
-
1 welder
-
1 electrician
-
2 unskilled workmen
-
1 fork lifter with operator , minimal load of 2.000 Kg
and minimal lifting capacity of 4 meters
All
equipments used for the erection must comply
with
safety norms.
GUARANTEE:
replacement
of damaged parts, 6 months guarantee
DELIVERY
INCLUDES:
.
Basement frame supporting the tanks
.
Electrical board with all necessary controls
.
D.C motors
.
Pumps in cast-iron with nickel-plated wheels
.
Water valves included in the limit of our supply
.
Lubricants for the starting up
DELIVERY
DOES NOT INCLUDE:
.
Wiring between electrical board and the different motors,
equipments and controls on the machine
.
Discharge ducts
.
Mason's works and foundations
.
Union piping between machine and steam, water,
compressed
air and gas source
.
Boiler for thermo oil or steam generation
.
Thermo-oil circulation pump
.
Compressor for air supply
.
Vapours suction hood
.
Electrical ground line according to EN 60204-1 Norms
and
those items not mentioned in this offer.
For
further information:
Please contact us at info@arioli.biz
|
