Minivapo is the Arioli steamer made, in its basic version, for a fabric content of 80 m, with a variable width from 1800 to 3600 mm.
Minivapo is equipped with a particular loop formation device excluding any direct contact with the printed face of the fabric. With such a system, the most delicate discharge prints and colouring overlapping may be safely treated without risking rubbing or marking.

A particular steam injection system with recirculating fans and humidifiers assures a constant humidity rate when working with saturated steam.

The installation of a steam superheater with a diesel oil or a gas burner to work at a high temperature up to 180°C is foreseen on Minivapo. Alternatively, a thermo oil battery may be installed to be able to work with superheated steam or hot air.
In such a way, Minivapo may be used to fix pigment prints or resins polymerizing in hot air at temperatures up to 160°C.

Control valves are foreseen to meter the steam quantity according to the fabrics weight and heat requirement.
Also the possibility to install an electronic control to monitor the working speed, the loop length and the fabric stay time in the chamber is foreseen by our engineers.

Minivapo is fitted with a PLC to completely automate the working processes.